G4 LED 24 SMD 3528 Light Cool White

G4 LED 24 SMD 3528 Light Cool White
G4 LED 24 SMD 3528 Light Cool White G4 LED 24 SMD 3528 Light Cool White
Brand: Eledric
Product Code: 0503 0015
Reward Points: 6
Availability: In Stock
Price: $5.50
Ex Tax: $5.00
Price in reward points: 130
2 or more $5.40
4 or more $5.20
6 or more $4.80
8 or more $4.40
10 or more $4.00

 

G4 LED 24 SMD 3528 Panel Light, Side Pins.

COOL WHITE.

EMC COMPLIANT.

This LED G4 Light is commonly used on caravan’s, pop-top’s, camper trailer’s, RV’s, motorhomes (particularly Jayco’s) & boats replacing the original G4 bulbs. Simply plug and play. NO REWIRING REQUIRED. These lights are not polarity conscious so it doesn't matter which way the light is plugged in, it will still work. Ideal for the overhead lights in cupboards, reading lights and the lights in the range hood.
 
The light output of this light is exceptional and will not disappoint anyone wanting lighting inside or outside there caravan. This light is a direct replacement of the existing G4 bulb. No rewiring required. Simply remove your existing bulb and replace with this LED light. It plugs straight in, taking a matter of seconds to do. Pull out your old bulb and plug this new LED light straight into the socket.
 
This LED G4 Light has been manufactured by an ISO9001:2008 certified company to very high standards using only high quality Epistar LED chips, and with EMC certification. Consider the quality of LEDs and ensure the lights are EMC compliant before you purchase.

 

  • LIGHT COLOUR: White (6000K to 7000K)
  • LED BRAND: Epistar (High Quality)
  • LED TYPE: SMD 3528
  • LED QTY: 24
  • BASE TYPE: G4
  • POWER: 1.375W @ 12V DC
  • VOLTAGE: 12V DC
  • CURRENT DRAW: 0.110Amp @ 12V DC
  • FEATURES: EMC, Bridge rectifier (Not polarity conscious)
  • LUMINOUS OUTPUT: 110-140Lm (Approx)
  • HEAD DIAMETER: 26mm
  • OVERALL LENGTH: 40mm (Including Pins)
  • THICKNESS: 6mm
  • PIN LENGTH: 14mm (Can be trimmed down to make shorter)
  • DISTANCE BETWEEN PINS: 5.3mm
 

  • They are LED, drawing much less power than a conventional dichroic bulb.
  • Brand name Epistar LED chips.
  • Direct plug and play. No rewiring required.
  • Electro-Magnetic Compatibility. (EMC Compliant).
  • High luminous output compared to wattage.
 

  • 1 x G4 LED 9 SMD 5730 light cool white.
 

(EMC) Electromagnetic Compatibility is the ability of electronic devices such as this LED light to operate as intended in proximity to other electronic devices or in the presence of electromagnetic fields. Unintentional radio frequency emissions from an electronic device and immunity of the device to radio frequency interference from other electromagnetic sources are included within electromagnetic compatibility.
 
An example of this being, you are watching your LCD TV and a non-EMC complaint light is switched on. You then start seeing interference on your TV screen, static, even picture freeze. Switching the light off and the interference has gone. By using an EMC compliant lighting product avoids this from happening, especially when these days so many devices we use contain sensitive electronics.
 
Please be aware that some non-EMC compliant LEDs may cause interference with electronic equipment such as TV’s, radio’s, etc.
 
 

When comparing the power consumption of this LED G4 light to an existing G4 bulb the results are like this:
 
- At 12.5V DC the LED G4 light uses 1.375W of power and draws 0.110Amps.
- At 12.5V DC the old G4 light uses 10W of power and draws 0.8Amps.
- With this comparison the LED light uses one quarter less power, BUT, produces 4 times more light.

 

Write a review

Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below: